To ensure uniformity in tube wall rolling and correct expansion without compromising on the mechanical integrity and also prevent leakages, Reliable Tube Expanders for Boilers made by Tritorc provide the following advantages:
|Minimum Tube Outer Diameter Serviced:||44.45 mm||(1.¾”) 1.750 Inch|
|Maximum Tube Outer Diameter Serviced:||114.3 mm||(4.½”) 4.50 Inch|
|Minimum Birmingham Wire Gauge Tube Thickness:||4|
|Maximum Birmingham Wire Gauge Tube Thickness:||15|
|Minimum Tube Sheet Thickness Serviced:||12.7 mm||(½”) 0.5 Inch|
|Maximum Tube Sheet Thickness Serviced:||7.93 mm||(2.⅝”) 2.625 Inch|
|Number of Expander Models:||105|
|Number of Spare Roller Set Models:||48|
|Number of Drum Type Variants:||11|
|Number of Header Type Variants:||12|
|* Custom Sizes are available as per Customer Request|
Free Technical Consultation and Demo.
Upto 12 Months of Warranty* For Hydraulic Bolt Tensioners
Trust gained from 32 years of Service to you.
Dedicated Personnel for your after sales support.
The Machinary & Tools are supplied promptly.
Well Developed Network of dealers World wide
Note: The Dimensional Data relevant to the daigram above is available in the catalogue.
The tool can be used for various Process equipment ranging from Boiler tubes, water walls, and Economizer to Riser and Air Heater Tubes.
Parameters such as Tube Sheet thickness, Outer Diameter of Tube (using a BWG Tube thickness chart), Cage length, and Adjustable length are key factors to be known while selecting the tool.
If the tool is utilized as per instructions under Ideal working conditions it may last up to 2000 usage cycles.
There are many variations of Tube Expander Tools available, choose your required Tube Removal tool.
|T-114 Series Specification|
|Short Series 5.⅛” (16.19 mm)||Short Series 7.⅛” (22.54 mm)|
|34 Mandrel Models are available||12 Mandrel Models are available|