To ensure uniformity in tube wall rolling and correct expansion without compromising on the mechanical integrity and also prevent leakages, Reliable Tube Expanders for Condensers and Heat Exchangers made by Tritorc provide the following advantages:
|Minimum Tube Outer Diameter Serviced:||12.7 mm||(½”) 0.5 Inch|
|Maximum Tube Outer Diameter Serviced:||38.1 mm||(1.½”) 1.5 Inch|
|Minimum Tube Birmingham Wire Gauge Thickness:||14|
|Maximum Tube Birmingham Wire Gauge Thickness:||22|
|*Custom Sizes are available as per Customer Request|
Free Technical Consultation and Demo.
Upto 12 Months of Warranty* For Hydraulic Bolt Tensioners
Trust gained from 32 years of Service to you.
Dedicated Personnel for your after sales support.
The Machinary & Tools are supplied promptly.
Well Developed Network of dealers World wide
Ideally suited for applications ranging from heat exchangers, Condensers. The materials that the tubes can be made from include Stainless Steel, Inconel, Titanium, and Carbon Steel. The three large rollers ensure that the tool is also well suited for various thick tube sheets.
According to the Tube sheet range the Threaded length can be increased. Longer reaches are available on request in 2-inch increments.
Parameters such as Tube Sheet thickness, Outer Diameter of Tube (using a BWG Tube thickness chart), Cage length, and Adjustable length are key factors to be known while selecting the tool.
If the tool is utilized as per instructions under Ideal working conditions it may last up to 2000 usage cycles.
There are many variations of Tube Expander Tools available, choose your required Tube Removal tool.
|800 Series||1200 Series|
|61 Expander Models available||60 Expander models available|
|38 Tube Roll Set Models Compatible with the tube expander models||35 Tube Roll Set Models Compatible with the tube expander models|
|22 mandrel models are available||22 mandrel models are available|
|With Roller Length 38.1 mm (1.½”) - Adjustable range is 12.7 mm (½”) to 38.1 mm (1.½”)||With Roller length 57.1 mm (2.¼”) - Adjustable range is 31.7 mm (1.¼”) to 57.1 mm (2.¼”)||With Roller Length 38.1 mm (1.½”) - Adjustable Range is||With Roller Length 57.1 mm (2.¼”) - Adjustable Range is|
|Standard - 1.½” (38.1 mm) to 4” (101.6 mm)||Standard - 1.½” (38.1 mm) to 2.¼|
|A:- 1.½” (38.1 mm) to 6” (152.4 mm)||A:- 2.¼” (57.1 mm) to 8.¾” (222.1 mm)|
|B:- 1.½” (38.1 mm) to 8” (203.2 mm)||B:- 2.¼” (57.1 mm) to 10.¾” (323.6 mm)|