To ensure uniformity in tube wall rolling and correct expansion without compromising on the mechanical integrity and also prevent leakages, Reliable Tube Expanders for Condensers and Heat Exchangers made by Tritorc provide the following advantages:
|Minimum Tube Outer Diameter Serviced:||44.45 mm||(1.¾”) 1.750 Inch|
|Maximum Tube Outer Diameter Serviced:||127 mm||5 Inches|
|Minimum Tube Birmingham Wire Gauge Thickness:||8|
|Maximum Tube Birmingham Wire Gauge Thickness:||18|
|*Custom Sizes are available as per Customer Request|
Free Technical Consultation and Demo.
Upto 12 Months of Warranty* For Hydraulic Bolt Tensioners
Trust gained from 32 years of Service to you.
Dedicated Personnel for your after sales support.
The Machinary & Tools are supplied promptly.
Well Developed Network of dealers World wide
Note: The Dimensional Data relevant to the daigram above is available in the catalogue.
These Tube expanders can take up the task of expanding thick wall tubes which are peculiarly found in Boilers and are thus suited for Heavy-Duty Applications.
Parameters such as Tube Sheet thickness, Outer Diameter of Tube (using a BWG Tube thickness chart), Cage length, and Adjustable length are key factors to be known while selecting the tool
If the tool is utilized as per instructions under Ideal working conditions it may last up to 2000 usage cycles.
There are many variations of Tube Expander Tools available, choose your required Tube Expander tool.
|30 Expander Models available|
|24 Tube Roll Set Models Compatible with the tube expander models|
|12 mandrel models are available|
|For Roller Length of 2.¼” (57.15 mm)|
|Minimum ‘A’||Maximum ‘B’|
|Standard Reach||38.10 mm (1.½”)||101.40 mm (4”)|
|“6” Reach||38.10 mm (1.½”)||152.40 mm (6”)|
|“8” Reach||38.10 mm (1.½”)||203.20 mm (8”)|