SideNav bar

Condenser Tube Expanders - 8012 Series

8012 Series

Internal Tube Cutters-TATP Series


To ensure uniformity in tube wall rolling and correct expansion without compromising on the mechanical integrity and also prevent leakages, Reliable Tube Expanders for Condensers and Heat Exchangers made by Tritorc provide the following advantages:

  • Durable Heat Treated Components.
  • Corrosion resistant plating.
  • Increased Feed Angle.

Metric Imperial
Minimum Tube Outer Diameter Serviced:   44.45 mm  (1.¾”) 1.750 Inch  
Maximum Tube Outer Diameter Serviced:    127 mm   5 Inches  
Minimum Tube Birmingham Wire Gauge Thickness: 8  
Maximum Tube Birmingham Wire Gauge Thickness: 18  
*Custom Sizes are available as per Customer Request

Ask Our Experts

Free Technical Consultation and Demo.

We Trust What We Make

Upto 12 Months of Warranty* For Hydraulic Bolt Tensioners


Trust gained from 32 years of Service to you.


Dedicated Personnel for your after sales support.

Fast delivery

The Machinary & Tools are supplied promptly.

Global Reach

Well Developed Network of dealers World wide

Frequently Asked Questions

For T-8012 Series Tube Expanders Tools

T-8012 Series Tube Expanders Tools

Note: The Dimensional Data relevant to the daigram above is available in the catalogue.

These Tube expanders can take up the task of expanding thick wall tubes which are peculiarly found in Boilers and are thus suited for Heavy-Duty Applications.

Parameters such as Tube Sheet thickness, Outer Diameter of Tube (using a BWG Tube thickness chart), Cage length, and Adjustable length are key factors to be known while selecting the tool

If the tool is utilized as per instructions under Ideal working conditions it may last up to 2000 usage cycles.

T-8012 Series Tube Expander Specification

There are many variations of Tube Expander Tools available, choose your required Tube Expander tool.

Technical Specification
T-8012 Series
30 Expander Models available
24 Tube Roll Set Models Compatible with the tube expander models
12 mandrel models are available
For Roller Length of 2.¼” (57.15 mm)
Minimum ‘A’ Maximum ‘B’
Standard Reach 38.10 mm (1.½”) 101.40 mm (4”)
“6” Reach 38.10 mm (1.½”) 152.40 mm (6”)
“8” Reach 38.10 mm (1.½”) 203.20 mm (8”)
Footer | Tritorc