SideNav bar

Condenser Tube Expanders - N Series

N Series

Heat Exchanger & Condensers Tube Expanders


To ensure uniformity in tube wall rolling and correct expansion without compromising on the mechanical integrity and also prevent leakages, Reliable Tube Expanders for Condensers and Heat Exchangers made by Tritorc provide the following advantages:

  • Durable Heat Treated Components.
  • Corrosion resistant plating.
  • Increased Feed Angle.

Metric Imperial
Minimum Tube Outer Diameter Serviced:   6.3 mm  0.250 (1/4) Inch 
Maximum Tube Outer Diameter Serviced:    9.5 mm   0.375 (3/8) Inch 
Number of Tube Expander Models:    18  
Number of Roll Set Models:    11  
Number of Mandrel Models: 10  
Minimum Tube Birmingham Wire Gauge Thickness:  18  
Maximum Tube Birmingham Wire Gauge Thickness:  30  
Minimum Adjustable range of the Threaded Bolt: 6.3 mm 0.250 (¼) Inch
Maximum Adjustable range of the Threaded Bolt: 25.4 mm   1 Inch
* Custom Sizes are available as per Customer Request
Tritorc Ask Our Experts
Ask Our Experts

Free Technical Consultation and Demo

Tritorc We Trust What We Make
We Trust What We Make

Upto 12 Months of Warranty* For Hydraulic Bolt Tensioners

Tritorc TrustWorthy

Trust gained from 32 years of Service to you.

Tritorc Reliable

Dedicated Personnel for your after sales support


Enter your first name
Enter your last name
Enter a valid email address
Enter Country Code
Enter your last name
Enter your company name
Enter your required Product
By clicking Get A Quote I confirm that I have read and agree to the Privacy Statement.
This is a required field

Frequently Asked Questions

For TN Series Tube Expanders Tools

T-8012 Series Tube Expanders Tools

Note: The Dimensional Data relevant to the daigram above is available in the catalogue.

Ideally suited for Copper tubes of small diameters and thinner gauges with applications ranging from radiators, Oil coolers, Condensers, and other apparatus with small diameters

Parameters such as Tube Sheet thickness, Outer Diameter of Tube (using a BWG Tube thickness chart), Cage length, and Adjustable length are key factors to be known while selecting the tool

Drive units which can use Pneumatic and Electric Drive types ranging from ⅜”, ½” and ¼” but various and available and can be driven using the same Drive Unit. The Drive Unit can be provided as per the Client’s requirement.

If the tool is utilized as per instructions under Ideal working conditions it may last up to 2000 usage cycles.

Footer | Tritorc