SideNav bar

Push Type Internal Tube Cutter - TATP Series

Push Type Internal Tube Cutter - TATP Series


Internal Tube Cutters-TATP Series
Catalogue

Features


  • Push type Internal Tube Cutter cuts the Ferrous or Non-Ferrous tubes of the Condensers, HeatExchangers.
  • This internal tube cutter can be operated with Electric or Pneumatic drill machine.
  • Cutting bit can be replace easily.
  • Standard adjustment reach is 4”.
  • The tools are available in the increments of 2” upto 10”.
  • Every tool comes with the complete set of Pilots to cover the entire range of tube thickness for that particular tube O.D.
Tube OD Range 5/8" to 1 1/2"
Model Range TATP-625 to TATP-1500
Specification

Metric Imperial
Minimum Outer Diameter of Tubes Serviced by the tool:    15.87 mm   (⅝”) 0.625 Inch 
Maximum Outer Diameter of Tubes Serviced by the tool:    38.1 mm   (1.½”) 1.5 Inches 
Minimum Birmingham Wire Gauge Thickness of Tube:    12  
Maximum Birmingham Wire Gauge Thickness of Tube:    22  
Number of Cutter Models available:   6  
Number of Spare Cutting Bit Models available:  6  
* Customised Sizes are Available on Customer Request
Tritorc Ask Our Experts
Ask Our Experts

Free Technical Consultation and Demo

Tritorc We Trust What We Make
We Trust What We Make

Upto 12 Months of Warranty* For Hydraulic Bolt Tensioners

Tritorc TrustWorthy
Trustworthy

Trust gained from 32 years of Service to you.

Tritorc Reliable
Reliable

Dedicated Personnel for your after sales support

GET AN INSTANT QUOTE

Enter your first name
Enter your last name
Enter a valid email address
Enter Country Code
Enter your last name
Enter your company name
Enter your required Product
Yes
By clicking Get A Quote I confirm that I have read and agree to the Privacy Statement.
This is a required field

Frequently Asked Questions

Internal Tube cutter TATP Series

The tool is easy to operate. It is to be inserted into the tube which is to be cut and the thrust collar is to be adjusted according to the length required and the Electric or Pneumatic drive can be started thus the tool can cut the tube in a few short seconds.

When ordering Spare cutting bits, please specify whether ordering for Non-Ferrous, Ferrous, or Stainless steel tubes as the Cutter bits for the 3 Types of tubes are different. Please refer to the operation manual for the parts list and the detailed features.

The standard adjustment reach is 4”. The Tools are available in increments of 2” up to 10”

Testimonials

Footer | Tritorc